Download Print this page

Quadratec Rock Sliders Installation Manual page 2

For use with rubicon rails for ’07- 18 jk 2 & 4 door wrangler vehicles

Advertisement

A Few Words About Product Safety:
Your Rock Sliders are designed to
enhance the utility and enjoyment of
your off road capable vehicle. Before
installation, please take a moment to
review the following safety information
Before You Begin Installation:
Congratulations on your purchase of the
Quadratec Rock Sliders for your Jeep
Wrangler.
When unpacking, check to make sure all
parts are included and not damaged due
to shipping. If any part is missing or
broken, please call Customer Service
at 800-745-6037 as soon as possible.
Product Care and Maintenance:
These custom fit Rock Sliders have been
designed for long life and great looks.
With proper care, they are designed to
provide years of use. Please see page 5
in this instruction booklet for all sug-
gested care for your Quadratec Rock
Sliders.
and installation instructions. Important
safety information is generally preceded
by one of three signal words indicating
the relative risk of injury.
The signal words mean:
A hazardous situation which, if not avoided, could result in death or
serious injury. You CAN be KILLED or SERIOUSLY HURT if you don't
follow instructions.
A hazardous situation which, if not avoided, could result in minor or
moderate injury. You CAN be moderately HURT and also may suffer
property damage if you don't follow instructions.
Careful attention is required to this instruction or operation but does
generally not relate to personal injury. Damage to your Quadratec
product or other property may result if you don't follow instructions.
Due to the length and bulk of these
guards, we strongly suggest you get the
®
help of a friend for steps that involve
lifting, locating or holding the rocker
guards during installation.
Thank you again for your purchase
and let's start the installation process.
As you unpack your rocker guards, be careful not to scratch the finish
with a knife or razor. We suggest placing the unpacked guards back
into the original box so it does not get scratched before the installa-
tion begins. It is highly recommended that a second person assist with
the installation of these rocker guards.
The Trusted Source
2
PARTS LIST
Rocks sliders (L and R)
REQUIRED TOOLS:
Safety Glasses
16mm deep socket and ratchet
®

Advertisement

loading

This manual is also suitable for:

12004.322012004.3221