Advertisement
Quick Links
Quadratec
Front Bumper
Installation Manual for '87-'06 Wrangler & Wrangler Unlimited
PARTS LIST:
FRONT BUMPER - QTY 1
BUMPER SPACER PLATES - QTY 2
1
⁄
" ZINC PLATED WASHERS - QTY 4
2
1
⁄
"- 13 x 1 -
1
⁄
" Grade 8 BOLTS - QTY 2
2
2
Required Tools Note: Depending on what bumper
you currently have on your Jeep
market) will determine exactly what wrench you
will need to remove and install your new
Quadratec bumper.
Rock Crawler
®
#
12057.0102
TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE:
READ ALL SAFETY MESSAGES AND UNDERSTAND ALL
INSTRUCTIONS AND PROCEDURE NOTICES BEFORE
ATTEMPTING TO INSTALL OR USE THIS PRODUCT.
MOUNT WINCH USING ONLY QUADRATEC APPROVED MOUNTING
PLATE. BUMPER/WINCH PLATE NOT INTENDED FOR WINCHES IN
EXCESS OF 9500LBS. LOAD LIMITS FOR YOUR BUMPER/WINCH
MAY BE LESS DEPENDING ON CONDITION OF YOUR VEHICLE
AND ATTACHMENTS. FOLLOW ALL INSTRUCTIONS, LIMITATIONS
& WARNINGS WITH YOUR VEHICLE, THIS PRODUCT, YOUR
WINCH AND SAFE WINCHING PRACTICES SUPPLEMENT.
RISK OF EYE INJURY! SAFETY GLASSES MUST BE WORN AT ALL
TIMES WHILE INSTALLING OR MAINTAINING THIS PRODUCT.
TORQUE AND RECHECK FASTENERS AFTER 250 MILES AND
FREQUENTLY THEREAFTER. INSPECT BUMPER, WINCH AND
MOUNT BEFORE USE. DO NOT USE IF DAMAGED.
CHECK STATE AND LOCAL HIGHWAY SAFETY LAWS REGARDING
PERMITTED BUMPER TYPES AND HEIGHTS.
REQUIRED TOOLS:
SAFETY GLASSES
T55 TORX HEAD SOCKET
TORQUE WRENCH
The T55 Torx wrench listed above is to remove
(factory or after-
and re-install factory bolts on a 97-06 Wrangler.
®
Some Aftermarket bumpers use an oversized
Phillips Head or bolt type head.
The Trusted Source
®
Advertisement
Related Manuals for Quadratec 12057.0102
Summary of Contents for Quadratec 12057.0102
- Page 1 READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUCTIONS AND PROCEDURE NOTICES BEFORE ATTEMPTING TO INSTALL OR USE THIS PRODUCT. MOUNT WINCH USING ONLY QUADRATEC APPROVED MOUNTING PLATE. BUMPER/WINCH PLATE NOT INTENDED FOR WINCHES IN EXCESS OF 9500LBS. LOAD LIMITS FOR YOUR BUMPER/WINCH MAY BE LESS DEPENDING ON CONDITION OF YOUR VEHICLE AND ATTACHMENTS.
- Page 2 This bumper has a cut-out for a vehicle recovery winch. A separate Winch Mounting Plate is required for installation. If you do not have this winch plate, go to quadratec.com and order part #92122.2900. The instructions below call out in step number two when this winch plate will need to be installed.
- Page 3 Installation Step One: Figure 1 Figure 2 Step One: Removing Existing Bumper the top and bottom bolts holding the Put on safety glasses. Locate the six fac- bumper to the frame and put them in a tory bolts holding your existing bumper safe place.
- Page 4 Installation Step Two (continued): At this point if you plan on installing a winch plate (not included), now is the time to reference the winch plate instruction sheets for proper installation of the winch plate and winch. By reviewing this now, it will save you time and hassles in the future, as the winch plate and bumper should be installed simultaneously.
- Page 5 Q-Tip to gently fill in these chips. This will prevent any rust from forming. Quadratec Rock Crawler Bumper shown Installed with our Quadratec Q9000 Winch 92122.2000 (sold separately) ®...
- Page 6 ® precision! Quality! craftsmanship! Quality! precision! craftsmanship! Key Q uadraTop Features 1. Fabric: Tough 23 ounce mildew and UV resistant vinyl coated polyester and cotton fabric provides lasting durability and is backed by a limited three year warranty. QuadraTops are available in factory original colors and textures to keep your Jeep ®...
- Page 7 Q uadraTop ® Replacement Soft Tops Affordable quality and durability with no compromises! Our top kits are designed to work with factory hard- ware and feature finer quality materials and workmanship along with the latest in manufacturing technolo- gies for unprecedented value. Our new product team with decades of soft top knowledge and experience delivers you all the great features you want in a replacement top with unsurpassed customer service and sup- port.
- Page 8 Quadratec to obtain a RGA number only to Quadratec branded accessories first sold (610-701-3336). All labor, removal, shipping in the United States, Quadratec warrants to the and installation costs are customer’s initial retail purchaser only that your responsibility.