Table of Contents
Advertisement
Quick Links
Quadratec
Trail and Tool Storage box
®
Installation Instructions: '07-'17 JK Wrangler #14141-2000
KIT CONTENT LIST:
A. M10 x 50mm Hex bolt (x4)
.
.
.
F
G
E
.
B. M10 x 20mm Hex bolt (x4)
.
C
A
.
B
.
D
C. M8 x 40mm Hex bolt (x4)
D. M8 nylon nut (x4)
.
H
.
.
I
J
K
E. M6 nylon nut (x16)
.
L
F. Small rubber gromet (x2)
G. Large rubber gromet (x2)
.
M
.
N
.
.
I. Floor mounting spacer (x16)
O
P
J. Flat washer (x30)
K. Black washer (x4)
L. Box front floor bracket (x2)
M. Tie down strap bracket (x2)
N. "L" Shaped mount bracket (x4)
O. Box rear floor bracket (x2)
P. Allen key
Q. Molle Panel
R. Rubber mat
.
R
.
Q
REQUIRED TOOLS:
Safety glasses
T-30 security torx bit
T-40 security torx bit
Allen key (supplied) or 4mm hex drive
10mm Wrench
13mm Wrench
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Quadratec Lost Canyon ROVE-SEC-1
Summary of Contents for Quadratec Lost Canyon ROVE-SEC-1
- Page 1 Quadratec Trail and Tool Storage box ® Installation Instructions: '07-'17 JK Wrangler #14141-2000 KIT CONTENT LIST: A. M10 x 50mm Hex bolt (x4) B. M10 x 20mm Hex bolt (x4) C. M8 x 40mm Hex bolt (x4) D. M8 nylon nut (x4) E.
- Page 2 BEFORE YOU BEGIN INSTALLATION: Congratulations on your purchase of your new Quadratec Trail and Tool Storage box. When unpacking, check to make sure all parts are included and not damaged due to shipping. If any part is missing, or broken, please call Customer Service at 800-745-6037 as soon as possible.
- Page 3 FIG 2 Put on safety glasses. The Quadratec Trail and Tool Storage box has the ability to be mounted in two locations in the rear of the cargo area, a forward or rear location. After choosing a mounting location, remove bolts and anchors at each of the four (4) chosen mounting locations with a T-30 torx bit.
- Page 4 (FIG 7 and 8) Four (4) M10 x 20mm hex bolts with or without spacer and M8 nylon nuts will be used to secure brackets to the Quadratec Trail and Tool Storage box. A T-30 security torx bit and a 13mm wrench is the appropriate tool.
- Page 5 FIG 16 Note: The Molle panel secured to both sides of the inside of the box, will allow you to secure items to either side of the Quadratec Trail and Tool Storage box. (FIG 16) STEP 7 FIG 17 To set combination lock, turn dial clockwise to the unlock position. (FIG 17) With arrow pointed in the downward position, locate void on opposite side of dial and with a small screw driver, insert and depress.
- Page 6 (3) years from date of initial retail sale. Quadratec reserves the rights to: (a.) require invoice or other proof your accessory is within the terms of this Limited Warranty as a condition of warranty service and, (b.) make future revisions to this product and...
Need help?
Do you have a question about the Lost Canyon ROVE-SEC-1 and is the answer not in the manual?
Questions and answers