Logging On And Off Via Radio Code - RADEMACHER DuoFern 9471-1 Instruction Manual

i

9.1 Logging on and off via radio code

You can control the DuoFern Tubular Motor Actuator 9471-1 direct-
ly using the radio code in order, for example, to be able to connect
further DuoFern transmitters to the actuator after installation. You
will find the radio code on the enclosed label and on the rear side
of the DuoFern Tubular Motor Actuator 9471-1.
i
24
Please note that the use of the radio code is limited
to 120 minutes after switching on the power supply
A detailed description on activating the radio code
function can be found in the instruction manual of
the DuoFern Manual Control and the HomePilot®.
EN