Related Manuals for AS MOTOR AS 531 4T MK
Summary of Contents for AS MOTOR AS 531 4T MK
-
Page 1: Operating Instructions
Operating Instructions Lawnmower AS 531 4T MK From serial number: 024512100001 Issued: 04 February 2015, V3.0 EN-Translation of the Original Operating Instructions... -
Page 2: Preface
dummy Preface Intended use The device is exclusively intended for mowing Please fill in all data referring to your device. When ordering spare parts, provide your deal- well maintained grassed lawn areas. er with the device and engine number. Only use attachments and cutting tools author- ised by “AS-Motor Germany”. -
Page 3: Table Of Contents
Contents Maintenance and cleaning ...... 17 Preface ............. dummy Preparations .......... 19 Intended use ..........Cleaning the device ....... 19 General inspection ......... 19 Explanation of the symbols ....dummy Inhalts verz eichnis Maintaining the engine ......19 Symbols in the instructions ....Checking the engine oil level .... -
Page 4: Explanation Of The Symbols
dummy Inhalts verz eichnis Explanation of the symbols Prior to any repair and mainte- nance work, pull off the spark plug connector. Symbols in the instructions In these operating instructions, the following symbols are used to denote special dangers. Warning. These symbols denote special Clean the ventilation grid! dangers. -
Page 5: Safety Instructions
Safe handling of fuel Safety instructions Get informed! Danger! Fuel is toxic and highly inflamma- For your safety, read these operating instruc- ble. tions with care. Familiarize yourself with the Danger of fire and explosion! control elements and the proper use of the Keep the fuel away from ignition device. -
Page 6: Check The Device Prior To Use
In case of skin contact, immediately wash with Switch off the engine and wait until the blade water and soap. Change your soiled clothing comes to a standstill as soon as you can. – before you tilt or transport the device. Measures in case of a fire –... - Page 7 – if the device starts to vibrate unusually Danger! severely. Risk of injury caused by thrown out objects. Caution when mowing slopes Never mow while persons, children, Devices fitted with a four stroke engines may pets, or property are in the vicinity. only be operated on less than 20°...
-
Page 8: When Work Is Completed
Only use the knives and spare parts authorized When work is completed by “AS-Motor Germany”. Unauthorized knives and spare parts can cause severe injuries. After mowing, always close the fuel valve and the tank ventilation. Prior to all maintenance work, wait until the Prior to leaving the device, wait until the engine engine comes to a standstill and pull off the comes to a standstill and pull off the spark plug... -
Page 9: Device Description
Device description 17 Spark plug connector Silencer 18 Impact protection Abrasive strip 19 Cover Type plate Oil filler opening Starter grip Impact protection flap Grass collection bag Handle bar with control elements Lever for lateral adjustment of handle- 10 Height adjustment of handlebar 11 Tank ventilation 12 Tank filler spout 13 Engine stop switch... -
Page 10: Control Elements
Locking min. speed: Control elements 1. Press the varioshift towards the handlebar until it engages. Releasing min. lock: 1. Press your thumb against the red release lever (5) and release the varioshift lever un- til you have reached the desired speed. Setting max. -
Page 11: Assembly
Lever height adjustment Unpacking Set the height of the lever by setting the 1. Remove the loose parts from the box. screw for the lever height adjustment. 2. Cut open the front side of the box. 3 positions are available. 3. -
Page 12: Assembling The Grass Collection Bag
Assembling the grass collection Mounting the grass collection bag 1. Switch off the blade and wait until the blade comes to a standstill. 2. Lift the impact protection flap (1). 3. Insert the grass collection bag (2) into the recesses. 4. -
Page 13: Information On Mowing
high grass, clutch engagement leads to over- load. To keep the area well maintained, mow fre- quently and keep the grass short. Do not mow your lawn too low in dry and hot conditions because the lawn is susceptible to sun and heat damage and will look unsightly! Only mow with a sharp and undamaged blade. -
Page 14: Tanking Up
Tanking up Adjusting the cutting height Adjust the cutting height setting only when the Danger! engine is switched off. Fuel is ignited by hot engine parts. Set the cutting height so that the blade does Prior to filling up, switch off the not touch the ground even in case of terrain engine and wait for at least unevenness. -
Page 15: Starting
Starting Driving Danger! Danger! During startup, there is a risk of Risk of injury caused by tripping or injury caused by the rotating blade. sliding while moving the mower backwards and turning it round. Make sure that no one is within the danger zone of the blade. -
Page 16: Emptying The Grass Collection Bag
2. Turn the device upslope. Danger! 3. Hold back the handlebar and the inner Risk of injury caused by rotating wheel. blades. When the engine is running, never The drive prevents sliding and supports the reach into the discharge channel. turn manoeuvre. -
Page 17: Maintenance And Cleaning
Maintenance and cleaning warranty. Operational safety is endangered as Regular maintenance keeps your device ready well. for use. Contact your authorised service centre for If you do not observe the maintenance notices, checkup if you detect problems during mainte- faults may occur that are not covered by the nance. - Page 18 ■ ▲ pact protection Are all protective devices and covers in place, fastened correctly and properly functioning? ■ ▲ Label Condition of the labels. ■ ▲ Engine See operating instructions of the engine manufacturer. ■ ▲ Check oil level (see operating instructions of the engine manufacturer).
-
Page 19: Preparations
For cleaning, use a hand brush. Remove Preparations stubborn dirt with a wooden or plastic spatula. Clean the outside housing parts with a cloth. Do not clean the device with water spray or high-pressure cleaner! Do not use any aggres- sive cleaning agents. -
Page 20: Checking The Engine Oil Level
- cooling fins of the engine Checking the drive clean at all times. 1. Put the device on a non-slip surface (e.g. Checking the engine oil level concrete or asphalt). 2. Switch off the engine. Never allow the oil level to be too low other- 3. -
Page 21: Storage
– before and after each mowing operation. Checking the blade clutch – when there are significant changes. Check the blade clutch for proper function by disengaging the blade. The blade must come All blade parts shown and their fastening parts from full speed to a standstill in less than must be changed 3 seconds. -
Page 22: Restarting
In autumn, have your device checked by an Disposal authorised service centre! Grass clippings must not be thrown into the Also observe the notices on storage in the waste but should be composted. attached operating instructions by the engine manufacturer. Shredded plant material decomposes quickly, can be utilized as fertilizer, and, therefore, be Restarting... -
Page 23: Troubleshooting
Troubleshooting The following table contains the most frequent problems and their elimination. If more problems occur, contact the closest authorised service centre. You can find an authorised service centre on our home page www.as-motor.de. Problem Possible cause Remedy Engine does not Engine stop switch is set to Set engine stop switch to ON. - Page 24 Housing of the mower is See also Maintenance and cleaning. jammed. No drive when drive Drive belt is insufficiently See also Checking the drive. lever is actuated tensioned. The blade does not V-belt is insufficiently ten- Authorised service centre. rotate sioned or damaged.
-
Page 25: Accessories
Blade is worn. Authorised service centre. Engine speed is too low de- Authorised service centre. spite full power. The device does not Drive belt does not declutch. Authorised service centre. stop The engine does not Switching off system is defec- Close the fuel valve. -
Page 26: Technical Data
Technical data Type AS 531 4T MK 0 – 30 °C Range of application(temperature) For temperatures below 5 °C, observe the engine manufacturer’s information regarding the engine oil. Engine, type One cylinder four stroke engine Manufacturer Briggs & Stratton Type... -
Page 27: Declaration Of Conformity
Ellwanger Straße 15 D-74424 Bühlertann www.as-motor.de Declaration of conformity We declare that the lawnmower type AS 531 4T MK cutting width 53 cm and with serial number starting from 024512100001 in the version we introduced to the market complies with - 2006/42/EC... - Page 28 Mar keti ng AS-Motor Germany GmbH & Co. KG Ellwanger Straße 15 D-74424 Bühlertann www.as-motor.de Professional technology for gardens and landscapes Allmäher® Manoeuvrable meadow mower for extensive green area care. The Allmäher reliably shreds metre-high grass, undergrowth, and weeds. Ride-on Allmäher® Ease of use and high area coverage all combined in a compact ride-on mower.