Scanning Document Stored In A Custom Box; Configuring Settings Before Sending; Scanning Document Stored In A Box - Kyocera 508ci Operation Manual

Operation on the Machine > Scanning Document stored in a Custom Box

Scanning Document stored in a Custom Box

Follow the steps as below for scanning a document stored in a custom box using the TWAIN driver.
When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
Primary Network (Client) (page 8-66)

Configuring Settings before Sending

Before sending a document, confirm that TWAIN driver is installed on a computer and the settings are configured.
Setting TWAIN Driver (page 2-59)

Scanning Document Stored in a Box

This subsection explains how to scan an original using an application supporting TWAIN.
NOTE
To load a document saved in the Custom Box, select the model name with (Box) from "Model" on the TWAIN driver
configuration screen.
1
2
Display the screen.
1
Activate the TWAIN compatible application software.
2
Select the machine using the application and display the dialog box.
NOTE
For selecting the machine, see the Operation Guide or Help for each application
software.
Display lists of documents.
1
Select a custom box stored a document. If a password has been set for the box, the
password entry screen appears. Enter the password and click the [OK] button. When you
select a box, the document files in the Custom Box appear in "Document List".
2
Set how to display the document data. Click the [Setting] button to select each item.
NOTE
For the settings, refer to Help in the dialog box.
3
Click [OK] button.
5-30