Table of Contents
Advertisement
PRECAUTIONS
Although overload and overvoltage protection is provided for the
controller circuits, we recommend installing additional protection
devices in the electrical panel.
The room temperature where the controller is located MUST
ALWAYS REMAIN BETWEEN 32°F AND 104°F (0°C TO 40°C).
To avoid exposing the controller to harmful gases or excessive hu-
midity, it is preferable to install it in a corridor.
DO NOT SPRAY WATER ON THE CONTROLLER!
FOR CUSTOMER USE
Enter the serial number located on
the side of the controller below for
future reference.
Model number:
Serial number:
SMART THERMOSTAT
SMART THERMOSTAT
SMART THERMOSTAT rev.01
3
Advertisement
Table of Contents
