Integra SMART THERMOSTAT User Manual page 19

Activating Temperature Curve
2
If you have just finished specifying the points on the curve:
Press the second functions push-button once again.
The word OFF flashes on the display.
Press the up-arrow adjustment button. The word ON
flashes on the display, indicating that the tempera-
ture curve is now activated.
Set the function to ROOM TEMPERATURE using the
function selector buttons.
If you have previously defined the points on the curve:
Set the function to SET POINT using the function
selector buttons. The current value of the tempera-
ture set point flashes on the display.
Press the second functions push-button. The word
OFF is displayed.
Press the second functions push-button to display the
points of the curve currently defined until the word
OFF flashes (thirteen clicks).
Press the up-arrow adjustment button. The word ON
is displayed, indicating that the temperature curve is
now activated.
Press the second functions push-button to complete
the sequence.
SMART THERMOSTAT
SMART THERMOSTAT rev.01
19