Table of Contents
Advertisement
SMART THERMOSTAT
Viewing Probe Temperatures
2
The controller can display probe temperatures individually. Probes can also
be turned on or off to control the temperature in different parts of the
building.
Set the function to ROOM TEMPERATURE using the function selector
buttons. The average room temperature is displayed.
Press the second functions push-button. The let-
ters "Pr 1" are displayed, alternating with the tem-
perature reading from probe 1 and the on/off state
of the probe.
For each additional probe, press the second functions push-button. The
letters "Pr x" are displayed, alternating with the temperature reading
from probe x and the on/off state of the probe.
Note: The display returns to the average room temperature after one
minute.
14
SMART THERMOSTAT rev.01
Advertisement
Table of Contents
