Table of Contents
Advertisement
SMART THERMOSTAT
Adjusting the Heater Offset
The heater offset is the number of degrees below the set point at which the
heating units turn on (see diagram above). It can be adjusted between
0.5
F and 40.0
o
Set the function to HEATER OFFSET using the function selector but-
tons. The current heating offset is displayed, alternating with the let-
ters "OFT".
Use the adjustment buttons to adjust the offset to the desired value.
24
SMART THERMOSTAT rev.01
F (0.3
C and 22.2
o
o
C).
o
Advertisement
Table of Contents
