Rain Dly; Skip Cur; Review; Temp Data - Weathermatic SmartLine SL800 Owner's Manual

5.0 Advanced Menu
20

5.25 RAIN DLY

The rain delay feature allows user to globally suspend watering
operations for all programs for a selected number of days in
either the BASIC or SMART watering modes.
Use UP or DOWN buttons to select 1 to 14 days for watering
suspension. The watering blackout will automatically be cleared
from the SmartLine® controller after the assigned days have
expired and watering will resume at the next available start time.
SMART watering deficits will reset at zero and will not resume
accumulation until the delay has ended.

5.26 SKIP CUR

You can increase the skip circuit threshold here. Some accesso-
ries, like pump start relays, In rush currents exceed the factory
setting of 1.0 Amp for SL800 and 1.5A for all other controllers.

5.27 REVIEW

Turn dial to Advanced Menu. Push NEXT button to access review
functions. Use UP/DOWN buttons to select review functions you
wish to view.
5.27.1 TEMP/DATA
TEMP/DATA provides the daily high/low temperature readings
in Fahrenheit (Celsius for 230V applications. Celsius is set using
METRIC under UNITS menu) from the SLW Weather Sensor for
the past 5 days. Press NEXT to view daily high and low readings
for the prior day. Continue pressing NEXT to view up to 7 days
of temperature history.
http://support.weathermatic.com

5.27.2 SLW

5.27.2.1 LASTCOM
This feature records time elapsed since last successful
communication between the weather station and control
panel.
5.27.2.2 BATTERY
Check the battery status in your wireless weather station
here.

5.27.3 NEXT RUN

NEXT RUN is the total amount of run time SMART has calculated
for each zone based on ET deficits and SMART system audit
information entered on the SMART side of the dial. NEXT RUN
is calculated and revised each night at midnight 365 days per
year. The cumulative run time will carry forward until the next
scheduled watering cycle. NEXT RUN times will return to zero
after each watering cycle. To review NEXT RUN, turn the dial
to Advanced Menu. Use the UP arrow button to access Review
and then use the NEXT and BACK buttons to scroll through the
zones.

5.27.4 RUN/SOAK

This feature allows the user to review expected Run/Soak
schedules that will occur when the controller is in the SMART
mode. Turn the dial to Advanced Menu. Use the UP button to
go to REVIEW and press the NEXT button. Use the UP button
to advance to RUN/SOAK. Press the NEXT button and zone 01
will show in the display. Press NEXT again and RUN with a time
will show. This is the maximum RUN time the controller can do
in SMART before going to SOAK. Press NEXT again and SOAK
will show in the display with a time. This is the minimum time the
zone must soak before it is ready to run again. SMART Run/Soak