Weathermatic PROLINE PL800 Owner's Manual
Hide thumbs
Also See for PROLINE PL800:
- Owner's manual (32 pages) ,
- Frequently asked questions manual (13 pages) ,
- Quick start manual (2 pages)
Related Manuals for Weathermatic PROLINE PL800
Summary of Contents for Weathermatic PROLINE PL800
- Page 1 Controller Models PL800, PL1600i PL1600, PL1620, PL1624, PL4800 Owner’s Manual Installation Instructions for each model included separately. www.weathermatic.com...
- Page 3 If the supply cord is damaged it must be replaced by the manufacturer, an authorized service agent or a similarly qualified person in order to avoid a hazard. U.S. Patent No. 7,406,363 TRADEMARKS: Weathermatic ® ProLine™ Smart Solutions for the Professional ® www.weathermatic.com...
-
Page 4: Table Of Contents
2.0 Installation Table of Contents 1.0 ProLine™ Accessories ..... 1 6.0 Advanced Functions ..... 12 6.1 FAULT . -
Page 5: Proline™ Accessories
420GLS Rain Sensor (Available through authorized TRC distributors. SLRC-KIT-HUB Wireless R/C Kit for All ProLine™ Models Contact TRC at 1-800-275-8558 or for All ProLine™ Models www.irrigationremotes.com.) ProLine™ accessories available through your professional Weathermatic installer. For the Weathermatic distributor directory, go to www.weathermatic.com. -
Page 6: Getting Acquainted With Your Proline™ Controller
Getting acquainted with your ProLine™ Controller 2.0 2.1 Getting Acquainted With Your ProLine™ Control 2.0 Getting Acquainted With Your ProLine™ Controller Panel PGM SUN MON TUE WED THU FRI SAT The ProLine™ Controller LCD Display provides the FAULT NO AC... - Page 7 2.0 Getting acquainted with your ProLine™ Controller No AC: Appears when there is no AC supply to the for 15 seconds, the selected program will operate in a controller. continuous loop. In other words, it will keep running the program continuously until the dial is switched to SYSTEM PGM Button: The ProLine™...
-
Page 8: Programming
Getting acquainted with your ProLine™ Controller 2.0 occur. The Language Selection LED will display red when to water after fertilizing and your rain sensor is still pausing controller is turned to SYSTEM OFF. the watering program. As long as the BYPASS LED is on, the sensors will not pause your system operation. -
Page 9: Programming
3.0 Programming to the next higher menu until the top level menu of the dial the correct day of the week. Your ProLine™ controller position is reached. will automatically adjust for leap years and USA daylight savings time. See DS TIME, in Advanced Functions to to A VALUE CHANGE will be entered in memory any turn the feature on/off and change the DST schedule. -
Page 10: Zone Run Times
Programming 3.0 Start times are selectable 3.3 Zone Run Times Note: Run/Soak in 10-minute increments. Your ProLine™ controller will feature can Note: Be sure you display remaining hours, reduce the need select the AM/PM minutes and seconds when to set multiple time as desired by a zone is watering. -
Page 11: Days To Water
3.0 Programming 3.4 Days to Water if it is on the same day that you set up the schedule. If you are using an ODD schedule, the ProLine™ controller will In this dial position you can not water on the 31 st day of a month and February 29 th of... -
Page 12: Monthly % Adjust
Programming 3.0 program until the blackout period has expired. Scrolling 3.6 Monthly % Adjust the beginning time (forward arrow) between 12:00 am and (Optional) 11:50 pm causes NONE SET to appear and clears the omit The Monthly % Adjust time. -
Page 13: Manual Start Functions
4.0 Manual Start Functions 4.0 Manual Start Functions can be set to run a minimum of 10 seconds or a maximum of 10 minutes. You must return dial to RUN for Manual The ProLine™ controller has three dial positions for manual Test operation to begin. -
Page 14: System Diagnostics And Eco Features
System Diagnostics and Eco Features 5.0 5.0 System Diagnostics and Eco Features 24V Power Your ProLine™ controller has both System Diagnostic and To check transformer voltage, turn dial to Multimeter. Eco Friendly dial positions: Outputs will appear in the screen. Press Adjust Value up arrow button until you get 24V Power. -
Page 15: Sensor Operation
5.0 System Diagnostics and Eco Features 5.3 Sensor Operation RAIN and FREEZE selections work the same as SENSOR described above, however allow you to differentiate Sensor between rain and freeze events. For example, you may The Sensor Operation want your potted plants to irrigate during rain but not function is used to omit during a freeze. -
Page 16: Advanced Functions
Advanced Functions 6.0 6.0 Advanced Functions RETRIEVE Advanced Functions provide additional information and allow more technical inputs commonly used by professional DEFAULT STORE installers. Advanced Functions contains menus within menus. To advance to a sub-menu, press the NEXT button. -
Page 17: Fault
6.0 Advanced Functions 6.1 FAULT SCROLLING FAULT FAULT DESCRIPTION MESSAGE This feature is used to identify problems that may require attention or repair to insure proper operation of the system. ZONE XX OPEN OUTPUT OPEN CIRCUIT: If a zone has Use NEXT button to view the type of fault. -
Page 18: Ds Time
Advanced Functions 6.0 6.3 DS TIME 6.5 ZN:ZN DLY Your ProLine™ controller can automatically adjust the time for This function allows user to set delay times between zone daylight saving time (DST). The factory default setting is OFF starts for use in systems with slow closing valves or pump and has been preset for the current USA schedule. -
Page 19: Mv/Zone
6.0 Advanced Functions 6.7 MV/ZONE 6.9 CLR ALL This feature is used to indicate which zones will use the This feature is similar to CLR PGM except that it clears all master valve/pump start output. Use NEXT button to set user programmed data for all four programs and returns each zone ON or SYSTEM OFF (ProLine™... -
Page 20: Grow-In
Troubleshooting 7.0 6.12 GROW IN 6.13 DEFAULT Grow In allows you to set up a new landscape grow-in This is an optional function that allows the user to store a program that can be retrieved later if it is watering program that will automatically expire after a set number of days that you select. -
Page 21: Watering Cycle Pause Functions
7.0 Troubleshooting • While pressing the • Reprogram ProLine™ controller. Note: You must arrow button, use an open For the PL800: have a 9V paper clip or ballpoint pen battery installed. to push in the Reset switch • Unplug the power supply on the side of the PL800. -
Page 22: Troubleshooting Guide
Troubleshooting 7.0 7.3 Troubleshooting Guide PROBLEM CAUSES SOLUTIONS No Display No power to controller Check power wiring, breaker, and be sure control panel is firmly closed. No 24V power from Replace transformer. Likely power surge damage transformer Replace fuse with factory replacement. Do Not use a higher value Blown fuse fuse. - Page 23 7.0 Troubleshooting PROBLEM CAUSES SOLUTIONS ProLine™ controller does Sensor jumper is removed and Install jumper wire between SEN terminals not turn on zone when no sensor is connected (Sensor Select BYPASS mode if desired expected LED is red) Sensor wires have been cut...
- Page 24 Troubleshooting 7.0 PROBLEM CAUSES SOLUTIONS ProLine™ controller does Zone set to OFF Set zone run time not turn on zone when Dial set to SYSTEM OFF Position Turn dial to RUN expected No zone run time set; no daily...
- Page 28 AD331...
Need help?
Do you have a question about the PROLINE PL800 and is the answer not in the manual?
Questions and answers
Does the ProLine model E-PL800 have a battery backup and if so where is it located? Our power went out for 6 hours but the sprinkler system time stayed correct. Want to know should I need to replace it. No mention in manual.
The Weathermatic ProLine PL800 does not use a traditional battery backup for time and date. Instead, it uses a Real Time Clock/Calendar and non-volatile memory to maintain settings during power outages. A 9-volt battery can be connected in the compartment behind the front panel to view and program the panel when it is open or removed from the housing.
This answer is automatically generated