Units; Default; Grow In; About - Weathermatic SmartLine SL800 Owner's Manual

5.5 UNITS

This setting allows for you to choose either STANDARD (United
States customary units) or METRIC. Press the BACK button when
the display reads your desired selection.

5.6 DEFAULT

This is an optional function that allows the user to store a
program that can be retrieved later if it is inadvertently deleted
or changed. Once the controller has been programmed, go to
Advanced Menu and select DEFAULT. Press NEXT and STORE
will appear on the display. Press the NEXT button and the
screen will display CONFIRM, press the NEXT button once more
and within a few seconds the display will read COMPLETE to
confirm that you have successfully stored your program. If the
controller has had the operating program changed and you
want to return to the stored program, go to DEFAULT, press
NEXT and one of the arrow buttons. The display will show
RETRIEVE. Press NEXT and the display will show CONFIRM,
press the NEXT button once more and within a few seconds
the display will read COMPLETE to confirm that you have
successfully restored your program.
5.7 GROW-IN
Grow In allows you to set up a new landscape grow-in watering
program that will automatically expire after a set number of days
that you select. At the end of your selected grow-in period, the
controller will automatically retrieve your long-term watering
program to avoid the necessity of having to return to the con-
troller.
Step 1: Set up your long-term SMART or BASIC watering pro-
gram.
5.0 Advanced Menu
Step 2:
Go to Advanced Menu and select DEFAULT. Press
NEXT and STORE will appear on the display. Press the NEXT
button and the screen will display CONFIRM, press the NEXT
button once more and within a few seconds the display will read
COMPLETE to confirm that you have successfully stored your
program.
Step 3:
Set up your temporary Grow-In program.
Step 4: Go to Advanced Menu and select GROW IN. Press
NEXT once to view default days for grow in. Use UP and DOWN
buttons to select 1 to 99 days for the grow in period. At the end
of your grow in, the controller will automatically retrieve the
long-term program stored in Step 2. Return dial to Run.

5.8 ABOUT

Provides information on software version in the SmartLine®
controller.
5.8.1

MODEL

Displays the model name of the controller.
5.8.2

VERSION

Displays current version of the controller's software.
5.8.3

BUILD

Displays current build version of the controller.
5.8.4

SER NUM

Displays the controller's serial number.
5.8.5

HW VERSION

Displays the hardware version of the controller.
5.8.6

NUM ZONES

Displays the maximum number of zones that can be created.
15
http://support.weathermatic.com