Power Sources - Perkins 854E-E34TA Systems Operation Testing And Adjusting

UENR0623
Illustration 39
Schematic for the temperature sensors for the 854F-E34T (model JS) engine and 854F-E34T (model JT) engine
The air inlet temperature sensor and the coolant
temperature sensor are passive sensors. Each
sensor provides a temperature input to the ECM. The
ECM controls following operations:
• Fuel delivery
• Injection timing
The sensors are also used for engine monitoring.

Power Sources

Introduction
The engine supplies power to the ECM. The ECM
powers the following components:
This document is printed from SPI². Not for RESALE
• All sensors
• The control valve for the fuel injection pump
• The solenoid for the wastegate
• Diagnostic connector
• Electronic unit injectors
The glow plugs are powered directly from the battery.
i05292810
41
Engine Operation
g03360457