Table of Contents
Advertisement
User Manual 1260-18
Unpacking and
Inspection
Reshipment
Instructions
INSTALLATION INSTRUCTIONS
1. Before unpacking the switching module, check the exterior of
the shipping carton for any signs of damage. All irregularities
should be noted on the shipping bill.
2. Remove the instrument from its carton, preserving the factory
packaging as much as possible.
3. Inspect the switching module for any defect or damage.
Immediately notify the carrier if any damage is apparent.
4. Have a qualified person check the instrument for safety
before use.
Proper ESD handling procedures must always be
used when packing, unpacking or installing any 1260
Series cards. Failure to do so may cause damage to
the unit.
1. Use the original packing material when returning the
switching module to Racal Instruments for calibration or
servicing. The original shipping carton and the instrument's
plastic foam will provide the necessary support for safe
reshipment.
2. If the original packing material is unavailable, wrap the
switching module in ESD Shielding and use plastic spray
foam to surround and protect the instrument.
3. Reship in either the original or a new shipping carton.
CAUTION
Installation Instructions 2-1
Chapter 2
Advertisement
Table of Contents
