Table of Contents
Advertisement
1260-82 User Manual
Unpacking and
Inspection
Reshipment
Instructions
INSTALLATION INSTRUCTIONS
1. Before unpacking the switching module, check the exterior of
the shipping carton for any signs of damage. All irregularities
should be noted on the shipping bill and reported.
2. Remove the instrument from its carton, preserving the factory
packaging as much as possible.
3. Inspect the switching module for any defect or damage.
Immediately notify the carrier if any damage is apparent.
4. Have a qualified person check the instrument for safety before
use.
!
Always perform unpacking, disassembly, repair, and
cleaning at a static safe work station.
1. Use the original packing material when returning the switching
module to Racal Instruments for servicing. The original
shipping carton and the instrument's plastic foam will provide
the necessary support for safe reshipment.
2. If the original packing material is unavailable, wrap the
switching module in an ESD Shielding bag and use plastic
spray foam to surround and protect the instrument.
3. Reship in either the original or a new shipping carton.
CAUTION
Installation Instructions 2-1
Chapter 2
Advertisement
Table of Contents
