Firmware Update - ABB i-bus KNX IPS/S 3.5.1 Product Manual

ABB i-bus ® KNX
Planning and application
4.2.2

Firmware update

The device's firmware should always be kept up to date. ABB provides tools with which
the device's firmware status can be checked.
ABB i-bus
It can be downloaded free of charge from our website.
The device cannot be updated with the i-bus
In this case, the firmware update will be possible only with the ETS app "ABB Firmware
Update 2.0." The app can be loaded free of charge from the KNX Online Shop.
Important
During the update process, the KNX bus (TP) must be connected in addition to the IP network (LAN)
so that the KNX parameters can be restored correctly.
Otherwise, the update process will fail.
It must be ensured that no voltage failure (KNX or IP) occurs during the update process, otherwise the
device can be destroyed.
® Tool can be used for a firmware update in non-secure mode.
® Tool in KNX Secure mode.
IPS/S 3.5.1 | 9AKK107680A8655 EN Rev. A 27