Commissioning; Overview; Parameters - ABB i-bus KNX IPS/S 3.5.1 Product Manual

ABB i-bus ® KNX

Commissioning

3 Commissioning
The IPS/S is parametrized using the application and Engineering Tool Software (ETS).
The application can be found under Manufacturers/ABB/System Infrastructure and Interfacing/IP Routers
and Interfaces.
For parameterization purposes, a PC or laptop with ETS and a connection to the KNX bus are required.
3.1

Overview

The IPS/S is parametrized using Engineering Tool Software (ETS 5 version 5.7.4 or higher).
3.2

Parameters

This chapter describes the parameters of the IP Interface Secure using the parameter windows.
Parameter window IP settings
All parameters for the device are set in the Properties window of ETS.
Note: The device name, IP address and tunneling servers are set in the Properties window of ETS.
IPS/S 3.5.1 | 9AKK107680A8655 EN Rev. A 19