Regulatory Standards - YOKOGAWA FU20-FTS Instruction Manual

2.9 Regulatory standards

IECEx
Applying standards : IEC 60079-0
Certificate no.*
Electrical data
Specific conditions : See Note 2
of use
CE
- ATEX
Applying standards : EN IEC 60079-0
Certificate no.*
Electrical data
Specific conditions : See Note 2
of use
- ROHSII
- PED
Damaging the screw thread of the sensor might influence the maximum
process pressure
- LVD
Applying standards : NEN-EN-IEC 61010-1
Note 1: Models without ID-chip (with fixed cable or VP type):
I/O signals are from/to an associated intrinsically safe certified pH/ORP
transmitter (e.g. Yokogawa transmitter Model FLX21/FLX202 series or
Yokogawa transmitter Model PH202S series).
Models with ID-chip (VS type):
I/O signals are from/to an associated intrinsically safe certified pH/ORP
transmitter, Yokogawa Smart Adapter Model SA11-P1.
Sensor input circuits:
In type of protection intrinsic safety Ex ia IIC, only for connection to a certified
intrinsically safe circuit, with the following maximum values:
Ui= 18 V; Ii=170 mA; Pi= 0.4 W;
Li= 0.1 mH (models with fixed cable) or Li= 0 mH (VS/VP type);
Ci= 150 nF (models with fixed cable) or
Ci= 0.4 nF (VS type) or Ci= 0 nF (VP type).
: IEC 60079-11
: IECEx DEK 11.0064X, issue 1
Ex ia IIC T3...T6 Ga
: See Note 1
: Directive 2014/34/EU
EN 60079-11
: DEKRA 11ATEX0014 X, issue 2
 II 1 G Ex ia IIC T3...T6 Ga
: See Note 1
: Directive 2011/65/EU
Applying sensors, detectors and (ion sensitive)
electrodes
: Directive 2014/68/EU
Applying article 4.3 (Sound Engineering
Practice)
: Directive 2014/35/EU
ANSI/ISA 61010-1
CAN/CSA-C22.2 No. 61010-1
IM 12B06J03-05EN-P
9