Specifications - SINGULARITY COMPUTERS SPECTRE III Assembly Manual

Specifications

Water-cooling Integration
Ports
Pump
Cable Management
Integration
Lighting Integration
PWM & D-RGB Hub
Motherboard Form Factor
Expansion Slots
Case Form Factor
Package Dimensions
Package Weight
Case Dimensions
Case Weight
Storage
Radiators
Maximum GPU Length
Maximum GPU Height
Maximum CPU Cooler Height
Maximum PSU Length
Front Panel I/O
Vertical GPU Mount
Vertical GPU Ribbon Cable
Vertical GPU Slot Spacing
Aquaero 6 LT Mount
Materials
Manufacturing Process
Assembly
Testing
Revision 1.2
Reservoir, Pump Top, Pump Cover, Fill Port, Drain Port, Part of cooling loop.
6x G1/4" BSPP | 1x Fill Port | 1x Drain Port
Compatible with all D5 pumps (Not included)
Cable Channels with Cable Combs for 4mm Sleeved Cables: 48 total strands: 3x
8pin EPS, 1x 24pin. 2x SATA Data. 2 of the 8pin EPS can be routed to both sides
of the motherboard (3 can be used at the same time). Up to 6x PCIE cables can
be routed through the PSU top shroud to the PSU (Not integrated into
distribution plate).
3 integrated DRGB 50CM LED Strips.
6x PWM Headers | 3x DRGB Headers | PWM & DRGB extension cables included
to run the hub from your motherboard.
XL-ATX (Up to: 285mm Wide & 343.5mm High) E-ATX, ATX, Mini-DTX, Mini-ITX.
8x
Mid Tower
640 mm(L) x 680 mm(W) x 163.5 mm(H) (Case comes flat-packed)
17 Kg
545 mm(L) x 254 mm(W) x 595 mm(H)
14.5 Kg
6x 2.5". 4 can be used at the same time. 2 are on top of the PSU shroud and
cannot be used with vertically mounted GPUs. 4 are inside of the PSU Shroud
360mm x 60mm. 1 set of standard 25mm fans
500 mm
170 mm in standard orientation | Unlimited in vertical orientation
170 mm
220mm (Space allowed for cables)
No Front I/O | Vandal Switch 16mm | White LED
1x Included (2nd Vertical GPU Mount Available Separately)
PCIe 3.0
x2 Slots
On PSU bottom panel (Cannot be used with PSU Shroud Lower SSD Mount).
6061 Aluminum Anodized. Cast Acrylic. Stainless Steel.
CNC Mill, CNC Router
Distribution plate assembled by Hand. Metal components need to be
assembled by the customer.
All Distribution Plates are factory pressure tested.
| Spectre 3.0 Assembly Manual
Page | 4