Step 15: Install Cable Cover - SINGULARITY COMPUTERS SPECTRE III Assembly Manual

Step 15: Install Cable Cover.

Pieces Involved
Install one fastener into the top right hole of the Cable Cover and align it with the top right hole
on the Distribution Plate. Partially tighten the fastener. Then install the rest of the fasteners and
tighten all of them. Do not over tighten fasteners on acrylic.
Revision 1.2
• Spectre 3.0 Case
• Cable Cover
| Spectre 3.0 Assembly Manual
• Fasteners – 4x M3 x 12mm
Page | 24