Opex Omation Envelopener 210 Series Operator's Manual page 108

4.2.3. Resetting the circuit breaker
1. If the machine has no display and is plugged in and turned on, check the
circuit breaker on the back of the machine.
The circuit breaker shown in Figure 4-19 has been tripped and is open.
If there is white showing,
the circuit breaker is open
54
Omation Series 210™ Envelopener® Operator Manual
This PDF has been created for exclusive use for
Pitney Bowes
Figure 4-19: Open circuit breaker
OPEX Corporation
Operation