Opex Omation Envelopener 210 Series Operator's Manual page 90

4.1.2. Output tray position
The position of the output tray can be adjusted for processing larger
envelopes. Simply lift the output tray up, move it to the desired position, and
press it down onto the stepped tray hitch (see Figure 4-10 through Figure 4-
12).
The output tray can be locked in one of three positions:
a. Against the machine (Figure 4-10).
Note: If you were referenced here by the operation chapter,
to the next step.
Operation
Omation Series 210™ Envelopener® Operator Manual
This PDF has been created for exclusive use for
Pitney Bowes
Figure 4-10: Output tray against the machine
OPEX Corporation
Output tray
against machine
click here
to return
45