Step 2: Slide The Service Provider's Sim Card Into Your Modem; Step 3: Install The Modem On Your Computer Or 3G Router, And Make An Internet Connection - Zoom 1099 Series User Manual

3g+ modem
Table of Contents

Advertisement

If you want to use AT&T service in the US, you can do that. We suggest that you go to the
following link to get helpful information about signing up for AT&T:
www.zoomtel.com/ATT

Step 2: Slide the Service Provider's SIM Card into Your Modem

Slide the cap off the modem. Position the modem so the silver-colored USB
connector is toward your left and the Zoom logo is facing away from you. To the
right of the connector is the cover, which you should remove by sliding it to the right
about 1/8 inches and then lifting it. The microSD memory and SIM card slots are
now exposed.
Hold the SIM card with its angled edge at upper right, and then carefully slide the card
under the silver bracket all the way to the left until the card stops.
Tip: If you are also inserting a microSD memory card for your modem, you should insert it
now. MicroSD cards can be used to store data on your modem or to expand the amount of
memory in your modem's phone book. The modem supports standard microSD memory
cards with up to 8 GB storage capacity.
Replace the back panel cover. In doing that, first put the small tab on the bottom of
the cover into the modem's slot, with the cover almost flush with the modem. Then
slide the cover toward the silver-colored USB connector.
Step 3: Install the Modem on Your Computer or 3G Router, and Make
an Internet Connection
If you are using the modem with a computer, please go to the appropriate section for
Windows or Macintosh computers.

Advertisement

Table of Contents
loading

This manual is also suitable for:

4598

Table of Contents