Installation - Bresser T-REX 2 Quick Start Manual

Assempling the extruder
1. Lower the platform and place the
dual extruder on the extruder seat.
2. Take the M2.5 Allen wrench from the
tool bag and four M3 bolts from the
accessory kit.
3. Adjust the extruder above the
extruder bracket to align the holes
for the bolts.
4. Fix the extruder onto the extruder
bracket by screwing in the M3 bolts
as shown.

Installation

- 7 -
Holes for bolts
Extruder
Extruder bracket
Bolts