Table of Contents
Advertisement
5. Carefully take the extruder out of
the foam shape. Avoid the nozzle
touching the desk to prevent from
scratching it.
7. Open the door and take out the
printer's top cover lid. Take the
fi lament out of the lid.
9. Take the foam piece out of the
printer's bottom. Slowly press the
platform downwards by hand to the
lowest position for easy subsequent
installation.
6. Remove the foam shape. Use a
scissors to cut the two ties on both
sides of the x-axis guide rail and
remove them.
8. Hold the printing platform on both
sides and lift it up slowly to facilitate
the removal of the foam piece below.
10. Unpacking is completed. It
is recommended to keep the
packaging material for further
transportation or storage.
- 5 -
Advertisement
Table of Contents
