Bresser T-REX 2 Quick Start Manual page 4

This 3D printer set was packed with care. Please follow the unpacking steps laid
out below.
CAUTION!
1. Open the box and remove the top
foam piece.
3. Remove the packaging bag and then
remove the tape and plastic wrap for
protecting the front door.
Unpacking
• Remove the package and take out accessories carefully! Do not use
force!
• Do not tear off the yellow adhesive tape around the nozzle. It has
thermal insulation and high temperature resistance characteristics.
2. Firmly grasp the two side handles of
the 3D printer. Lift it out of the carton
and place it on a stable and plane
surface.
4. The accessories are placed in a foam
shape in the printer's top opening.
Take out all accessories except the
two extruders which are alraedy
cable connected with the printer.
- 4 -