Table of Contents
Advertisement
3. Remove the PD-106 board. (Refer to Section 1-4-3.)
4. Remove the LCD panel. (Refer to Section 1-6.)
5. Remove the SW-1082 board. (Refer to Section 1-4-4.)
6. Remove the LED-388 board and PSW-77 board.
(Refer to Section 1-4-5.)
7. Remove the five screws, then remove the bracket.
8. Remove the two screws, then remove the two
mounting brackets.
9. Remove the power button, AE button assembly, REC
button assembly, PLAY button and CNTL button from
the upper case assembly.
AE button assembly
REC button
Power button
assembly
BTP
2.6x6
Mounting
bracket
Upper case assembly
10. Attach the upper case assembly in the reverse order of
steps 1 to 9.
1-4
CNTL button
PLAY button
BTP
BTP
2.6x6
2.6x6
Bracket
1-3-3. Gasket Plate
1. Remove the upper case assembly. (Refer to Section 1-
3-2.)
2. Remove the two screws (B 2.6x4), one screw (BTP
2.6x8) and gasket plate (1).
3. Remove the two screws (B 2.6x4), two screws (BTP
2.6x8), gasket plate (3) and gasket plate (4).
4. Remove the two screws (B 2.6x4) and gasket plate
(2).
Gasket
plate (4)
B 2.6x4
BTP
2.6x8
B 2.6x4
BTP 2.6x8
Gasket
plate (1)
5. Attach the gasket plates in the reverse order of steps 1
to 4.
Gasket
plate (2)
B 2.6x4
B 2.6x4
B 2.6x4
BTP
2.6x8
Gasket
plate (3)
DXC-S500 (E)
Advertisement
Table of Contents
