4-3.
Lens Block
4-3-1.
Ornamental Plate (1850) Replacing Method
Removal
1.
Apply alcohol to the gap of the Ornamental Plate (1850) using tweezers or fine-tipped stick as shown below.
2.
Remove the Ornamental Plate (1850) upward.
Installation
1.
Stick 1G Ornamental Plate tape (1850) at three locations shown below.
2.
Install the Ornamental Plate (1850) matching the projection with the hole on the Filter Tube (1850).
1G Ornamental Plate Tape (1850)
Ornamental Plate (1850)
DSC-RX10M4
Tweezers
Solvent
Hole
Projection
Ornamental Plate (1850)
Projection
Ornamental Plate (1850)
Filter Tube (1850)
4-25