Removal And Installation Of Cabinet; Chu Block; Ccu Block - Sony DXC-S500 Service Manual

1-3. Removal and Installation of Cabinet

1-3-1. CHU Block

1. Turn the lens cap in the direction indicated by the
arrow, then remove the lens cap.
2. Remove the four screws, then remove the lower case.
3. Remove the three screws, then remove the front panel
assembly.
4. Disconnect one flexible flat cable from the connector
(CN101) on the CA-46 board.
5. Remove the harness guard.
CA-46 board
Front panel assembly
PM 2x5
Lens cap
Flexible flat cable
PM 2x5
Lower case
6. Attach the front panel assembly and lower case in the
reverse order of steps 1 to 5.
DXC-S500 (E)
CN101
Harness guard
PM 2x5

1-3-2. CCU Block

1. Remove the four screws, then remove the upper case
assembly.
2. Disconnect the two flexible flat cables from the
connectors (CN3 and CN5) on the SW-1082 board and
disconnect one harness from the connector (CN107)
on the CN-2272 board.
SW-1082 board
CN3
B 2.6x4
Harness
Upper case assembly
Flexible
CN5
flat cables
CN107
B 2.6x4
CN-2272 board
1-3