Osd Menu Operation - Eneo MEB-65M2713M0A User Manual

 DPC (Defective Pixel Correction): Defective pixels are pixels in a CMOS image sensor,
which fail to sense light levels correctly. The series of camera supports defective pixel
correction. You can set the DPC as <Live DPC> and <White DPC>.
 Language: Under the sub-menu, you can select English, CHN 1(Chinese 1), CHN 2
(Chinese 2), Ger(German), FRA(French), ITA(Italian), SPA (Spanish), POL(Polish),
RUS(Russian), POR(Portuguese), NED(Dutch), TUR(Turkish) and JPN (Japanese)
 Output mode: click the <Output> menu, you can choose its format (AHD, CHD,THD,
CVBS), Video Out(NTSC, PAL), Frame rate (12.5P & 20P), Resolution(5MEGA, 4MEGA)
etc.
Format
AHD (AHD)
TVI (THD)
CVI (CHD)
CVBS
AF Mode: This option refers to the motorized camera.
 AF mode: allow you set motorized mode parameter, included Semi, Auto and Manual
 ONE SHOT AF: The menu will automatically focus the lens.
 TDN AF: When transfer between Day and night modes, the camera will automatically focus
the lens. The sub-menu covers OFF and ON
LENS INIT: the option will allow you initialize the lens to defaulted value.

2.4.2 OSD Menu operation

Call the menu locally via DVR port
1. Connect the camera with your DVR and the monitor shown as Pic 15.
2. Power on the camera, the DVR and the monitor, and then view the image on the monitor.
3. Open the DVR main menu, and enter into the menu <Device-->PTZ-->Protocol> and
configure the protocol to <Coax>;
Resolution Frame Rate
5MP / 4MP 20 fps
5MP / 4MP 20 fps
4MP 25 fps / 30 fps
720P 25 fps / 30 fps
Pic.15
Remarks
CVI format only support
4MP resolution, its frame
rate defaulted as 25fps @
PAL system and 30 fps @
NTSC system.
12