Chapter 5
5. 9. 6.
Factory Defaults
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
System Tools
default values.
•
The default
IP
•
The default
Subnet
5. 9. 7.
Backup & Restore
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
System Tools
•
To back up configuration settings:
Click
Backup
to save a copy of the current settings in your local computer. A ".bin" file
of the current settings will be stored in your computer.
>
Factory
Defaults. Click
Address: 192.168.0.1
Mask: 255.255.255.0
>
Backup &
Restore.
Configure the Router in Access Point Mode
Restore
to reset all settings to the
90