Local Management - TP-Link Archer C50 User Manual

Chapter 4
3. Enter the old password and new password twice to change the login password.
4. Click Save.
Note: The new password must not exceed 32 characters and not include any spacing.

4. 18. 10. Local Management

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to System Tools
• Allow all LAN conencted devices to manage the router locally
1. Keep the Available Host (IP/MAC)
manage the router.
2. If you want to access the router via both HTTPS and HTTP, please tick the
checkbox in HTTPS Service
3. Keep the local management port as default if you don't know which port to use.
4. Click Save.
Note: If the web management port conflicts with the one used for Virtual Server entry, the entry will be automatically
disabled after the setting is saved.
• Allow a specific device to manage the router
1. Enter the IP or MAC address of the host that you want to manage the router in the
Available Host (IP/MAC)
(X is any hexadecimal digit).
2. If you want to access the router via both HTTPS and HTTP, please tick the
checkbox in HTTPS Service
3. Keep the local management port as default if you don't know which port to use.
4. Click Save.
Note: If your PC is blocked but you want to access the router again, press and hold the
to the factory defaults.
> Administrator and locate the
empty, which means you don't specify any host to
column. Otherwise, keep it disbled.
entry. The format of the MAC address is XX:XX:XX:XX:XX:XX
column. Otherwise, keep it disbled.
Configure the Router in Wireless Router Mode
Service Configuration
Reset
section.
Enable
Enable
button to reset the router
65