TP-Link Archer C50 User Manual page 25

Chapter 4
• Addressing Type - Choose the addressing type given by your ISP, either Dynamic IP
or Static IP. Click the
button to disconnect immediately.
• MTU(Bytes) - The default MTU size is "1460" bytes, which is usually fine. It is not
recommended that you change the default MTU Size unless required by your ISP.
• Connection Mode
• Always On - In this mode, the internet connection will be active all the time.
• Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
• Connect Manually
immediately. This mode also supports the
on Demand
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
Note: Sometimes the connection cannot be terminated although you have specified the
applications are visiting the internet continually in the background.
BigPond Cable
If your ISP provides BigPond cable connection, please select
• Username/Password
fields are case-sensitive.
Connect button to connect immediately. Click the
- In this mode, the internet connection can be terminated
- You can click
mode. The internet connection can be disconnected automatically
- Enter the user name and password provided by your ISP. These
Configure the Router in Wireless Router Mode
Connect/Disconnect
Max Idle Time
BigPond
Disconnect
Max Idle Time
to connect/disconnect
function as Connect
Max Idle Time because some
Cable.
20