TP-Link Archer C50 User Manual page 50

Chapter 4
5. Click Save.
6. Go to Access Control
1 ) Click Add New.
2 ) Give a name for the rule in the
host drop-down list; select
schedule_1
3 ) Leave the status as
7. Select Enable Internet Access Control
8. Select Allow the packets specified by any enabled access control policy to pass
through the Router
> Rule and add a new access control rule.
Description
target_1
from the schedule drop-down list.
Enabled as click Save.
as the default filter policy and click Save.
Configure the Router in Wireless Router Mode
field. Select
from the target drop-down list; select
to enable Access Control function.
host_1 from the LAN
45