Quick Setup; Operation Mode - TP-Link Archer C50 User Manual

Chapter 6
• Wireless 2.4GHz/5GHz
wireless function, and you can configure them on the
•

Operation Mode

• Wireless Radio
enabled or disabled.
• Name(SSID)
• Mode - The current wireless mode which the router works on.
• Channel - The current wireless channel in use.
• Channel Width
• MAC Address
• WDS Status
• Ethernet - This field displays the current settings of the WAN and LAN ports.
• Internet - This shows whether the WAN (Internet) port of the router is connected.
• LAN1/LAN2/LAN3/LAN4
powered-on device and the negotiation speed of the LAN port.
• System Up Time - The length of the time since the router was last powered on or
reset.
Click Refresh to get the latest status and settings of the router.
6. 2.

Quick Setup

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Quick Setup.
3. Click Next to start. Then follow the step-by-step instructions to connect your router
to the internet.
6. 3. Operation Mode
The router supports three operation modes: Wireless Router mode, Access Point mode,
and Range Extender Mode.
- This field displays the basic information or status of the
- The current wireless working mode in use.
- Indicates whether the wireless radio feature of the Router is
- The SSID of the Router.
- The current wireless channel width in use.
- The physical address of the router.
- The status of the WDS connection is displayed.
- This shows whether the LAN port is connected to a
Configure the Router in Range Extender Mode
Wireless > Basic Settings page.
97