Table of Contents
Advertisement
Spectrum Digital, Inc
1.0 Overview of the XDS560v2 STM JTAG Emulator
The XDS560v2 STM JTAG Emulator is designed to be used with digital signal
processors (DSPs) and microprocessors which operate from +1.2 to +4.1 volt levels on
the JTAG interface. The power for the emulator comes from the provided supply. This
means no power is drawn from the target system or host PC.
The XDS560v2 STM is designed to be compatible with the existing Texas Instruments
XDS560 emulator and operates with debuggers provided by Texas Instruments.
1.1 Key Features of the XDS560v2 STM JTAG Emulator
The XDS560v2 STM JTAG Emulator has the following features:
• Supports Texas Instrument's Digital Signal Processors with JTAG interface
(IEEE 1149.1)
• Modular tail connector for alternate JTAG headers.
• Advanced emulation controller provides high performance.
• MIPI System Trace capability for advanced development.
• Ethernet communications to host PC.
• USB 2.0 communications to host PC.
• Supports +1.2 volt to +4.1 volt JTAG interfaces.
• 1 power LED
• 6 LEDs for operational status.
• 2 LEDs for ethernet status.
• User accessible RESET switch
• Power provided by +5 volt supplied power supply
• Compatible with Texas Instruments Code Composer Studio, DSP BIOS,
• Compatible with Windows 2000/XP/Vista Operating Systems
1-2
and RTDX
XDS560v2 STM JTAG Emulator Technical Reference
Advertisement
Table of Contents
Need help?
Do you have a question about the XDS560v2 and is the answer not in the manual?
Questions and answers