Spectrum Digital, Inc
2.1
What You'll Need
The following checklists detail items that are shipped with the XDS560v2 STM JTAG
emulator and additional items you'll need to use these tools.
Hardware checklist
__ host computer
__ emulator module XDS560v2 STM JTAG emulator with power supply, USB or ethernet
__ target system
__ optional adapters TI 14-pin (2x7), 20-pin CTI (2x10), 60 pin TI, ARM 20 pin connector
to target system, to MIPI 60 pin interface
included
Software checklist
Please refer to the Quick Start Guide for the specific requirements of the software
development tool chain you are using.
2-2
An IBM PC/AT or 100% compatible PC or laptop running Windows
XP/2000/Vista with the following peripherals:
- 2 GB of free hard disk space
- Minimum 1 GB ram, 2 GB recommended
- Minimum 1.5 GHz., dual core recommended
- Color display
- Internet access
- USB port
- Ethernet port
- DVD reader
cable
A board with a TI DSP or Microcontroller and power supply
XDS560v2 STM JTAG Emulator Technical Reference
Need help?
Do you have a question about the XDS560v2 and is the answer not in the manual?