Elitech ChloroChek Chloridometer 3400 User Manual page 6

Table of Contents

Advertisement

PRECAUTIONS AND WARNINGS
This equipment is for professional in vitro diagnostic use.
Take standard precautions and adhere to good laboratory practices.
To avoid contamination, clean the skin thoroughly and use clean or single use laboratory equipment while
collecting the sweat sample.
To avoid contamination, use clean or single use laboratory equipment during the analysis of the sweat
sample on the ChloroChek.
When opening the 100 mmol/L NaCl/H
the correct location. The SS-251 ampule has a One Point Cut (OPC). Locate this point and break ampule by
pushing the top of the ampule back while holding onto the base. It is recommended to use a plastic sleeve
when breaking ampules. ELITech Group provides two protective sleeves with each new box of sweat controls
(SS-150).
The reagent set contains acetic acid and nitric acid. If discharged in the plumbing system, rinse with plenty of
water.
The symbols defined below may appear on the packaging material of the instrument or supplies, on the serial
number label or in the operating instructions:
In-vitro diagnostic device
This product conforms to EC Directive 98/79 for in-vitro diagnostic devices
Attention! (refer to documentation) Please follow the safety notices in the equipment operating
instructions.
General Warning, Risk of Danger
Expiration Date
Batch Code
Catalog Number (Model Number
Consult Instructions For Use
Serial Number
RoHS Directive 2011/65/EU
Manufacturer
1.1 ChloroChek Description (continued)
O Standard Solution (REF: SS-251) ampule, carefully break ampule at
2
SECTION 1
INTRODUCTION
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents