Table of Contents
Advertisement
A barcode reader can be attached to the COM1 port and allows for scanned barcodes to be used in ID
management. Barcode reader AC-192 is available for purchase and necessary cables are included.
1
To use a barcode for ID management, the batch and/or sample ID Management type must first be set to
numeric or alphanumeric from the ID Management settings menu.
2
Plug barcode reader into the COM1 RS232 port and attach power cable. Plug unit into power source and
ensure a green light appears on the top of the barcode reader.
3
Enter the measurement screen and condition the working solution. Once the Ready screen appears,
follow the instructions in section 3.7 for sample measurement with ID management or refer to flow
charts using ID management in Appendix D.
4
Screens are dependent upon ID Management type selections. Whenever the on screen keypad appears
for entering a batch or sample ID, a barcode may be scanned using the barcode reader and will be
entered into the screen. The keypad is still accessible and the barcode can be deleted or modified.
44
DIGITAL DATA MANAGEMENT
5.9 Using a Barcode Scanner for ID Input
SECTION 5
Hide quick links:
Advertisement
Table of Contents
