Preparing The Working Solution - Elitech ChloroChek Chloridometer 3400 User Manual

SECTION 3
OPERATING THE CHLOROCHEK
3.4 Preparing the Working Solution (Reagents)
A fresh Working Solution must be prepared each day before using the ChloroChek.
Appropriate good laboratory practices should be followed, including using appropriate personal protective
equipment (PPEs). Refer to SDS.
NOTE:
The Reagent Set (SS-248) contains 1 bottle of SS-248GS and 37 flasks for SS-248BS. The 1 bottle of SS-248GS
contains enough Gelatin Solution to prepare all 37 flasks of SS-248BS. Each flask of SS-248BS contains 10 mL of
Buffer Solution.
1 Add 20 drops of Gelatin Solution (SS-248GS) to one flask of Buffer Solution (SS-248BS).
2 Put the cap back on the flask and carefully swirl or invert it to mix it thoroughly. This forms the "Working
Solution."
3 Place the Magnetic Stir Bar (RP-485) in the Titration Beaker (RP-484). Pour the freshly prepared Working
Solution into the Titration Beaker.
14