Table of Contents
Advertisement
Hands should be gloved so that the electrodes and beaker are not contaminated.
1
The Electrode Carriage must be in the up position.
2
Install the anode (red housing) and cathode (black housing) electrodes in the appropriate colored
receptacle. The short side of the electrode goes into the receptacle leaving the long end exposed.
3
Install Measurement Electrode. The Measurement Electrode must be aligned to match the 3-pin
connections without binding. Push the Measurement Electrode straight into the receptacle when the
pins have been correctly aligned. The Measurement electrode is not screwed into place.
SECTION 3
OPERATING THE CHLOROCHEK
3.3 Installing Electrodes
13
Hide quick links:
Advertisement
Table of Contents
