Table of Contents
Advertisement
INSTALLATION/REMOVAL
Safe Service Practices
Service and adjustments are important for proper vehicle operation. If
you're not familiar with safe service and adjustment procedures, have a
qualified dealer perform these operations.
Always follow safe shop practices. The work space should be clean,
bright and well ventilated. Always turn the engine off before performing
service.
WARNING! Severe injuries could occur if an elevated vehicle falls or moves.
Never place body parts under an elevated vehicle unless the vehicle is properly
immobilized on appropriate stands.
Do not use a floor jack or other lifting device as a stand. Always place
appropriate stands under an elevated vehicle and block any wheels that
remain in contact with the ground to prevent vehicle movement. Never
place body parts under an elevated vehicle unless the vehicle is properly
immobilized on appropriate stands.
To avoid injury to hands while
installing or removing track
systems, position hands on the
frame as shown.
WARNING! Serious injuries may
result if hands, feet or clothing
become entangled in a moving
track. Stay clear of all moving
tracks. We recommend having
your dealer perform all track
system service and alignment
procedures.
Track System Installation
CAUTION! Hot exhaust system parts can cause burns. Allow components to
cool sufficiently before proceeding.
Initial Installation
POLARIS recommends having your authorized POLARIS dealer
perform the initial installation of a track system.
1. Install the track system using the instructions provided with the
installation kit.
2. After the initial installation, and after every future reinstallation of the
tracks, always adjust track angle of attack, system alignment and
track tension after the first use of the vehicle. See pages 18-25.
INSTALLATION/REMOVAL
15
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PROSPECTOR PRO and is the answer not in the manual?