Polaris 2882167 Manual

REAR AUDIO HARNESS KIT
P/N 2882167
APPLICATION
Verify accessory fitment at Polaris.com.
BEFORE YOU BEGIN
Read these instructions and check to be sure all parts and tools are accounted for.
Please retain these installation instructions for future reference and parts ordering
information.
KIT CONTENTS
This kit contains parts for installation of the rear audio harness only. Prior installation of the following additional
kits is also required (sold separately):
1. One of the following Battery Connection Kits:
• PN 2879862, 2881551, or equivalent (2 passenger RZR
• PN 2880055, 2881646, or equivalent (4 passenger RZR
2. Extreme Audio Pod Kit, PN 2881227
3. One or more of the following audio source components and any required harness(es):
• RIDE COMMAND™ 7" Display Kit, PN 2882068, RIDE COMMAND™ 7" Display Mount Kit, PN 2882069,
and Audio Adapter Kit, PN 2882534
• Interactive Digital Display 2.0, PN 2881554, and Interactive Digital Display Install Kit, PN 2880497
• Dash Radio Kit, PN 2881988
• Bluetooth ® Remote Kit, PN 2881470
• Other equivalent audio source component
This Kit includes:
REF QTY PART DESCRIPTION
1 1 Harness, Signal
2 1 Harness, Power
3 10 Cable Tie
1 Instructions
TOOLS REQUIRED
• Safety Glasses
• Pliers, Push Pin Rivet
IMPORTANT
Your Rear Audio Harness Kit is exclusively designed for your vehicle. Please read the installation instructions
thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to
ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
ASSEMBLY TIME
Approximately 30–40 minutes
Additional time may be required for optional steps, or
to accommodate other installed accessories.
NOTE
Instr 9927572
® )
® )
• Screwdriver Set, Torx
• Socket Set, Metric
Rev 01 2016-11 Page 1 of 4
PART NUMBER
-
-
7080492
9927572
®