Page 1
LCD Screen Notes Key Functions Clockwise and counter-clockwise to adjust the menu bar Middle button: to confirm the item, selection and setting.
Page 2
Menu item function description Menu options Sub menu function Explaining Show the nozzle and bed temperature, Info screen Fan and printing speed,printing time Return to Prepare Main previous menu Disable steppers Close step drive Moving X Y Z axis by your hands The machine returns to the origin Auto home position.
Page 3
Preheat before printing After the machine turned on the electricity, display the main menu interface, as shown here: Press the "middle" button to enter the selected item.
Page 4
Set the machine zero Note: Select "AUTO HOME" instruction, the axes will move to the zero position (bottom left corner), after hit limit switch stops. Make sure the Z-axis limit switch is installed correctly (see assembly section detail view) or nozzle will spray to the platform while executing this command. Moving axis Stepping 10mm Stepping 1mm...
Need help?
Do you have a question about the CR-10 and is the answer not in the manual?
Questions and answers