ADInstruments AD6236P Operation Manual page 22

_______________________________________________________________________________
a. Slide the FUNCTION SWITCH to "m/min", in stall the
SURFACE SPEED WHEEL on the SHAFT instead of the
RPM ADAPTER.
b. Depress the MEASURING BUTTON and simply
attaching the SURFACE SPEED WHEEL to the detector.
Release the MEASURING BUTTON when the display
reading stabilizes.
3. SURFACE LONG MEASUREMENT
a. Slide the FUNCTION SWITCH to "m" and use the
corresponding part. The other same as (2).
Note: Because of the difference between the girth of outer
surface and inner flute of line speed sensor. For contact line
speed or length measurement. The displaying result is correct
when outer surface of the sensor contacts with the measured
object contact and but when inner flute of the sensor and the
measured object, that the reading multiply 0.9is the real
result (eg.: measure wire, cable and rope etc.)
Accessories:
Carrying case
©Copyright Abacanto Digital SA.
Manual de usuario AD6236P
AD Instruments
1pc
22