ADInstruments AD6236P Operation Manual page 15

_______________________________________________________________________________
value, last value) obtained immediately before turning off the
MEATURING BUTTON is automatically memorized. For
example, please ret. following figure 1. That memorized value
can be displayed on the indicator by turn once depressing the
memory button. The symbol "UP" represents the MAX. Value
and "DN" the MIN. Value, "LA" the Last Value.
3.
Data stored button operation
Display last value and for the fourth time press memory button,
the tachometer will indicate whether to switch to another display
mode. During display value changing from 20 to 1, it is switched if
you release memory button that have not change to max value/min
value/last value will be displayed in turn by pressing memory button
anytime.
If the value changes form 20 to 1 (please ret. Following figure 2)
and displaying "An **" (An is ab. of anamnesis). The display is
switched successfully. So the memory button is pressed, stored data
will be displayed in turn. Display format is as follow: the first is
serial number of stored data and then display the concrete value.
After all stored data is displayed(96s), the tachometer will
©Copyright Abacanto Digital SA.
Manual de usuario AD6236P
AD Instruments
15