Turning The Instrument On And Off; Setting The Wavelength - ADInstruments AD2A04 User Manual

AD Instruments
_____________________________________________________________________

5.2 Turning the instrument on and off

Press the "ON/OFF" key briefly.
The instrument powers on, and backlighting switches on.
Please check the battery capacity if it fails.
Press the "ON/OFF" key briefly again.
The instrument powers off, and backlighting switches off.
Note: Auto-off function
1. The instrument powers off automatically if no keypress in 10 minutes.
2. Press the "ON/OFF" key for about 2 seconds to power the instrument with "Auto-off"
function deactivated.

5.3 Setting the wavelength

Press the "λ" key repeatedly until the desired wavelength is displayed. You can select
from six possible wavelengths: 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm.
The instrument defaults to 1310nm.
©Copyright Abacanto Digital SA.
16
Manual de usuario AD2A04/AD2B04