Battery Replacement / Recharging - ADInstruments AD210 User Manual

_______________________________________________________________________________

Battery Replacement / Recharging

Regular Batteries:
When regular batteries are used and LCD displays the Power is
batteries:
1. Turn off the Solar Model Analyzer.
2. Remove the screw of the battery cover.
3. Lift and remove the battery cover.
4. Remove the old batteries and insert new batteries:
Rechargeable Battery(1.2V) x 8 PCS
Type:AA (or SUM-3) Nickel Metal Hydride Battery 2500mAH or above.
5. Install the battery cover and secure the screw.
Rechargeable Batteries:
When Rechargeable Batteries are used, please follow below steps to charge the batteries:
1. Connect the AC Adaptor with the Solar Module Analyzer.
2. Turn on the Solar Module Analyzer.
3. Press the BATTERY CHARGE button to start
recharging.
4. During recharging (takes 10 hours), LCD displays "Power: Charge".
©Copyright Abacanto Digital SA.
Manual de usuario AD210
AD Instruments
2%, please replace the
24