Electrostatic Discharge - Quectel BC660K-GL Manual

5.3. Electrostatic Discharge

The module is not protected against electrostatics discharge (ESD) in general. Consequently, it is subject
to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and
packaging procedures must be applied throughout the processing, handling and operation of any
application that incorporates the module.
The following table shows the module's electrostatic discharge characteristics.
Table 27: Electrostatic Discharge Characteristics
Tested Interfaces
VBAT, GND
Antenna interface
Other interfaces
BC660K-GL_Hardware_Design
Contact Discharge
± 5
± 5
± 0.5
BC660K-GL Hardware Design
(25 º C, 45 % Relative Humidity)
Air Discharge
± 10
± 10
± 1
NB-IoT Module Series
Unit
kV
kV
kV
46 / 57